Does your connector hold up under shock and vibration?

If signals drop out during shock or vibration testing, could the fault be at the contact interface?


Multiple contacts

Spring wires surround the pin


Custom options

Configurable and bespoke


AS9120

+ ISO 9001 accredited

Shock and vibration testing

A brief interruption can be easy to miss.

A connector can pass a static continuity check and still show brief interruptions during a shock pulse or a vibration run. Monitoring continuity during the test can reveal dropouts. If you trace the fault to the mating contacts, IEH’s hyperboloid socket is one option to assess: several spring wires grip the same pin and can follow its movement.

IEH reports tests exceeding 300 g without electrical interruption. 

IEH connector options

Rectangular PCB Connectors

Replacing an existing board connector? Check the footprint and mating interface against the HMK, HMM and HRM options.

HVM Micro Hyperboloid

Running out of board space for signal contacts? HVM is the compact series to assess.

HBH Hybrid Connectors

Using separate connectors for power, signal and RF? HBH is an option if the design calls for a single interface.

Application example

A 1,200-pin rotary-wing interface.

Fretting and signal loss under vibration were problems on a rotary-wing aircraft interface board. The replacement also had to accommodate a high pin count without excessive mating force. IEH developed the custom 1,200-pin hyperboloid connector shown here.

"The Global Supplier with the Personal Touch"

Contact Our Team